|
|
.
The Perfect Solution for
High Traffic Access Control and Timekeeping
-
Verify 10 People per Minute
-
Border Control, Cruise Ships,
Sports Facilities, Factories, Large Retailers and Offices
-
School Attendance and Security
Developed from the Well-Proven Digi-2
Finger Camera
The VeryFast brings to the Systems
Integrator all the advantages of Biomet's well proven 2-Finger Geometry
Biometrics combined with advanced Access Control, packaged in a small,
robust and nicely designed housing for simple plug-and-play installation.
Various optional features and custom specific design possibilities are
available to optimally adapt the VeryFast to the individual application
requirements.
For users, the VeryFast is
convenient, non-threatening, fast and accurate, and quickly builds a high
degree of confidence in its positive security merits. Users touch a platen
with the first two fingers of either hand to prove their identity. The
VeryFast works equally well with the right or left hand.
Biometric
Features
| Data Capture |
|
| Template Size |
Maximum 20 bytes per person |
| Template Storage |
On-board memory
for 1'000 users (higher capacity optional). Download to any I.D. card.
Upload to host or networked. |
| Operational Speed |
|
| Enrollment |
< 1 minute nominal |
| Verification |
< 1 second |
| Accuracy |
|
| FAR/FRR |
< 0.1% (adjustable threshold) |
VeryFast™
Standard Features and Functions
| Robust
housing which provides space and flexibility to install one or several
optional components/ features (see below). Front panel designed to accommodate
different combinations of standard and optional components. |
| Basic model (model MS) comes
equipped with a standard Magnetic STripe Card Reader (ISO 3554, track 2)
and one serial I/O port with RS-232/485 selectable interface (9600 baud). |
| Interface electronics to
provide a real-time clock, networking, and operating features listed below: |
Network Comms Port
|
RS-232, RS-485 and TTL Communications
I/O connectors |
| Optional System Interface |
Selectable ASCII, Weigand
I or Weigand II Emulation, ISO track 1 or 2 magnetic stripe or barcode
compatible format. |
| User Capacity |
On board data memory for
up to 999 users. Special Versions (off-line / standalone) expandable to
8,000 users. Max 20 bytes per user. |
| LCD Display
for user or supervisory instructions, 2 lines of 16 characters. |
| LED Array and finger outline
to guide placement of two fingers of either hand. |
| Beeper
to indicate "Ready" and "Accept" or "Reject". |
| Selectable
Authenticate/Verify or Pinless "Who AM I?" Identification Mode. |
| Door Lock Output |
NO/NC contact. Switched
at 2A. |
| Alarm Outputs |
Tamper Switch, Power Failure,
Door Contact Open. |
| REX |
Request to Exit Switch from
secure side. |
| Input Voltage |
10-14 VDC, 2.5A peak, 0.6A
idle. |
Optional Features
The VeryFast can be equipped
with the following readers:
-
Model MS - Magstripe
(Read Only)
-
Model SC -
Smartcard (Read or Read/Write, With or Without Encryption)
-
Model C
- Contactless (125 kHz Read or Read/Write)
|
| Keypad, 12 keys. |
| Networking Interface, 24/9600-Baud
Modem or TCP/IP Ethernet 10-base-T (802.3). |
| Transaction Data Memory
32 Kb, addressable, non-volatile, for on-board buffering. |
| Provision for Auxiliary
Inputs/Outputs such as timekeeping interface, motion/heat detectors, etc. |
| Addition of BioSmart+ smartcard
read-writer with encryption facility (SAM-Secure Application Module). |
Physical Specifications
| Terminal size (WxHxD): |
12.5cm x 19.0cm x 16.0cm (4.8" x 7.4" x 6.25") |
| Operating Temperature: |
0°C to +55°C |
| Storage Temperature: |
-10°C to +85°C |
| Relative Humidity: |
0-95% RH non-condensing |
Click here
to download our detailed specifications brochure.
©2001 BioMet Partners Inc. All rights reserved.
|
